22 products
22 products
Sale
Quick view
ATC350X Swing-arm TRX450R Conversion
Shipping calculated at checkout.
Conversion Swingarm, lets you adapt a modern trx450r axle/carrier/brake/hubs to your 85-86 ATC350X.
Uses your original ATC350X shock and linkage.
***Swingarm Pivot bearing kit , rear chain guide, heavy duty front chain block and hardware included***
available in +2 & +4”
Powder coat included. Built to order **
These parts are for offroad use only. The customer is responsible for proper install of parts. Ride at your own risk.
ATC 350X Invert Fork Conversion Clamp Kit
Shipping calculated at checkout.
ATC350X invert fork conversion Clamp kit
Includes triple clamps, spacers, and crf brake rotor adaptor
Designed to work with CRF450R 05-08 crf250r 04-09 forks. We recommend shortening 2-3” depending on tire size. Please call for info on fork shortening and rebuild.
Lead Time 4-6 weeks, maybe sooner depending on current work load
**Does Not Include Front Forks**
Customer is responsible for proper install of parts. Ride at your own risk.
**PLEASE NOTE, THESE CLAMPS DO NOT WORK ON THE ORIGINAL ATC350X FRONT FORKS, HUB, WHEEL OR AXLE**
Billet front hub + 10” wheel package
Shipping calculated at checkout.
**ATTENTION - ALL POLISHED WHEELS ARE ON BACK ORDER FROM OUR SUPPLLIER. PLEASE CALL US FOR DETAILS ON AVAILABILITY AS IT UPDATES WEEKLY.
IF YOU ARE OKAY WITH BLACK PLEASE LET US KNOW.
PLEASE NOTE, THIS IS A GENERIC PICTURE AND WHEEL DESIGN MAY VARY DEPENDING ON WHAT IS AVAILABLE.
New from BVC Trikes
This is a Billet front hub designed to replace the hard to find 85-86 ATC250R front hub
Our hub is setup to run a modern atv 10” wheel
10x5” 3:2 offset 4/144
This allows for more tire options over the 11” setup.
Use this hub on your atc250r or as part of a modern trike build that requires a 250r hub
included 4 studs, lug nuts, bearings and seals (installed)
included 10” DWT wheel
DG RCM 4-Stroke Exhaust 85-86 ATC350X
Shipping calculated at checkout.
RCM 4-Stroke Exhaust Systems
Features
- RCM tapered reverse cone megaphone systems come with steel or aluminum alloy mufflers
- Provide large increases in acceleration and top-end speed
- Tuned for maximum peak horsepower and thrust
- Repackable spiral-fluted core silencers
- Large-diameter steel headpipes included (except where noted)
- Available without spark arrestors only
Krome Power RCM Exhaust System
- Finish: Chrome
- Head pipe material: Steel
- Muffler material: Steel
- Spark arrestor: Not available
- Type: Full exhaust
The RCM stands for Reverse Cone Megaphone. The midpipe starts at a specific diameter and gets larger as it gets to the muffler body. This helps scavenge exhaust gases from the engine. This increased scavenging process will give your ATV better throttle response and a smoother power delivery. You won't find a better Krome Power RCM Complete Exhaust for your Honda.
Maier Rear Fender
Shipping calculated at checkout.
ATC350X 85-86 Rear Fender
This high-impact polypropylene alloy delivers a high-gloss finish with strength characteristics capable of enduring extreme weather and temperature conditions.
Specifications
- Proprietary thermoplastic olefinic elastomer (TPO)
- Resistant to chemicals
- UV-stabilized
- One-year manufacturer's limited warranty
BVC Trikes Front Axle
Shipping calculated at checkout.
Replace that worn out axle on your ATC250R or ATC350x!
This axle can also be used on dirt bike invert kits that require use of a atc250r axle.
Maxxis RAZR M931 & M932 Tires
Shipping calculated at checkout.
Maxxis RAZR M931 and M932 Tires
Size range to cover all racing and recreational needs. Front tires designed for precise steering and lateral traction. Rear tires designed for maximum traction and acceleration.
Non- Directional, 4-Ply & 6- Ply
Maxxis 4-Snow M910 Tires
Shipping calculated at checkout.
Maxxis 4-Snow M910 Tires
Soft compound stays flexible in cold weather for better grip. Reversible treads for optimum traction on snow and ice. Diameter expands up to 40% during acceleration for added traction and ground clearance. Use on ATVs with high fenders/clearance for tire expansion.
For use on ice and snow only.
2 ply, Rear, Directional
Maier Front Fender
Shipping calculated at checkout.
ATC350X 85-86 FRONT FENDER
This high-impact polypropylene alloy delivers a high-gloss finish with strength characteristics capable of enduring extreme weather and temperature conditions.
Offered in two colors
Kenda Front Max K284 Tires
Shipping calculated at checkout.
Kenda Front Max K284 Tires
First ribbed tire designed specifically for use as a front tire.
Specifications
- Improved steering precision over O.E.M. tires
- 2 Ply, Non Directional
Complete Gasket Kits
Shipping calculated at checkout.
Athena Top End Kit includes all necessary top-quality gaskets, rubber parts and valve stem seals for a complete top end rebuild. Athena Complete Kit includes all necessary gaskets, rubber parts and valve stem seals to rebuild engine.
Complete Kit does not include oil seals.
Fits 85-86 Models
Rear Carrier Bearing Upgrade Kit
Shipping calculated at checkout.
Increase bearing capacity and bearing life by 30%.
Specifications
- Replace two side-by-side bearings with one double-wide angular contact bearing
Throttle Kits
Shipping calculated at checkout.
Each throttle kit comes with all necessary fittings, including, if necessary, a carburetor top, control cable and a choice of different throttles ranging from slow to quick turning.
Fits 85-86 Models
Tapered Steering Bearing Kit
Shipping calculated at checkout.
Upgrade ball-style bearings to heavy-duty taper bearings. Direct replacement for O.E.M. taper bearings.
Specifications
- Kits contain top and bottom bearing assemblies and seals
Fits 85-86 ATC350X Models
Honda ATC350X Seat Bracket
Shipping calculated at checkout.
Billet Seat Latch for 1985-1986 ATC350X
Made in House- Made in the USA
Comes as pictured with pins & clips
Great replacement for the OEM set
This will save you in a race
**LIFETIME WARRANTY** Just save your invoice!
Top End Gasket Kits
Shipping calculated at checkout.
EST (Extreme Sealing Technology) Top End Kits; critical seal and superior durability from technologically advanced materials; meets and exceeds O.E.M. specifications; kit contains valve stem seals and exhaust gaskets. Top End Kits contains head, base, exhaust, reed and power valve gaskets (where applicable) for complete top end rebuild.
Fits 85-86 Models
Swingarm Bearing Kits
Shipping calculated at checkout.
An ill-performing swingarm can lead to a loss of action and handling in your rear suspension. Restore the handling and action in one, complete, low priced swingarm kit. Each kit includes all the needle bearings, pins, seals, caps, collars and bushings your ride requires for a smooth traveling swingarm. All parts are O.E.-quality or better and at a fraction of the O.E. price.
Specifications
- Kits feature parts made from O.E.M.-grade materials, packaged for exact fit installations
Fits 85-86 Models
Air Filters & Pre- Filters
Shipping calculated at checkout.
UNI Filter Multi-Stage Competition Air Filters
This 2-stage filtration increases performance and engine life. Dual filters trap dirt, keep motors running clean even under the most severe conditions.
Specifications
- Completely washable
Designed to increase airflow and performance. Pleated media creates a large surface area. Multilayers of woven cotton gauze media offer excellent filtration. Strong, pliable, molded flange and seals. Washable and reuseable, pre-oiled and ready to ride.
Specifications
- One-year limited manufacturer's warranty
Protects engine and air filters against dirt and debris. Hydrophobic manufacturing process repels water. Horsepower levels are maintained longer due to cleaner primary filter. Outerwears pre-filters are washable and reusable. Pre-filters are specific to filter shape, filter manufacturer and application.
Caliper Rebuild Kit
Shipping calculated at checkout.
Each kit contains all rubber parts necessary to rebuild one brake caliper.
Specifications
- Includes boots, seals, bleeder cap, brake pad retaining pins and copper washers
Fits 85-86 Models
Wheel Bearing & Seal Kits
Shipping calculated at checkout.
Contains all the bearings and seals required to refit a wheel. High-speed bearings are manufactured to ABEC 3 precision levels. Triple-lip rubber seals keep the grease in and the water and dirt out.
Specifications
- Chevron SRI 2 grease contains rust and oxidation inhibitors (-29° C to 177° C)
- Double-lip® TC seals with stainless steel garter springs
Cable Assemblies
Shipping calculated at checkout.
Black PVC outer sheathing provides maximum flexibility and durability. Pre-stretched inner wire is flared out before the terminal end, and is cast for superior pull-out resistance. Molded-rubber components feature EPDM rubber for high UV-resistance and longer life. Rubber boots are designed with a tighter fit than O.E.M. for superior water and dirt resistance. Meets or exceeds O.E.M. standards.
Specifications
- Includes adjuster hardware spring, nut and barrel where applicable
Fits 85-86 models
Carburetor Kits
Shipping calculated at checkout.
Kits include all necessary components to repair carburetor; models with two carburetors include components to repair both carburetors. Components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non-US model.
Specifications
- Includes all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat
- O.E.M. jet sizes are included in the kit
- Nitrile rubber material used on all O-rings and rubber gaskets
- High-performance interface gasket material for all paper gasket applications
Fits 85-86 models
